Scroll Wheel Building Block

The Scroll Wheel building block is used to generate scroll wheel clicks using ControllerMate's internal mouse.

A Scroll Wheel building block has one ON/OFF input and one ON/OFF output. When the input value turns ON, the Scroll Wheel building block will perform an action based on its settings, then turn its output ON.

To configure a Scroll Wheel building block, select the type of scroll wheel that should be simulated, and the direction and distance that the scroll wheel should turn.

In the example above, the Building block will turn the horizontal scroll wheel two clicks to the right each time it is turned ON.

Scroll Wheel building blocks require the internal mouse to be enabled in ControllerMate's preferences. If the internal mouse is disabled, INACTIVE will be drawn over the building block.